The Australian Government is now operating in line with Caretaker Conventions, pending the outcome of the 2025 federal election.
The goods the subject of the application (the goods) are:
Clear float glass (CFG) in nominal thickness of 3 to 12 millimetres (mm).
The tolerances for each of these thicknesses are set out in the following table.
| Nominal thickness (mm) | Acceptable tolerances (mm) | |
|---|---|---|
| Minimum | Maximum | |
| 3 | 2.80 | 3.50 |
| 4 | 3.51 | 4.50 |
| 5 | 4.51 | 5.50 |
| 6 | 5.51 | 7.00 |
| 8 | 7.01 | 9.00 |
| 10 | 9.01 | 11.00 |
| 12 | 11.01 | 12.30 |
The goods have the following characteristics:
- transparent;
- flat; and
- rectangular or square in shape.
With respect to exports from Thailand only, CFG with edge working in the form of an ‘arris’, ‘rough arris’ or ‘seamed’ edge (removal of the sharp edges of the glass), on any number of sides or faces is the goods.
With the exception of the above reference to edge-worked glass from Thailand, glass with the following characteristics is not the goods the subject of the original notice:
- coated, coloured, tinted or opaque;
- absorbent, reflective or non-reflective layer;
- wired;
- bent, edge-worked, engraved, drilled, enamelled or otherwise worked;
- framed or fitted with other materials;
- toughened (tempered) or laminated;
- acid etched; or
- low iron.
Further information on the goods can be found in ADN 2025/028 below.
| Case information | |||
|---|---|---|---|
| Applicant | PT Xinyi Glass Indonesia | Tariff Classification |
7005.29.00 (Statistical codes 03, 04, 05, 06 and 09) 7006.00.00 (Statistical code 49) |
| Contacts for this investigation |
Case Manager: Tel: (03) 8539 2562 |
Mailing address: | The Director - Investigations 4 Anti-Dumping Commission GPO Box 2013 Canberra ACT 2601 |