The goods the subject of the application (the goods) are:
Hot-rolled deformed steel reinforcing bar whether or not in coil form, commonly identified as rebar or debar, in various diameters up to and including 50 millimetres, containing indentations, ribs, grooves or other deformations produced during the rolling process. The goods include all steel reinforcing bar meeting the above description of the goods regardless of the particular grade or alloy content or coating.
The goods the subject of the application (the goods) are:
Certain strata reinforcing steel bolts, hollow, made from flat rolled steel, whether or not metallic coated (e.g. galvanised), whether or not containing alloys, with an outside diameter from 44 millimetres up to and including 48 millimetres, of a length from 2.2 metres up to and including 2.5 metres, of a base metal thickness from 2.8 millimetres up to and including 3.4 millimetres, whether or not including the welded ring.
Further information
The goods the subject of the application (the goods) are:
Hot rolled coil steel (including in sheet form), with or without patterns in relief (known as checker plate), whether or not containing alloys, not clad, plated or coated (other than oil coated).
Further information on the goods, including exclusions, can be found in ADN below.
The goods the subject of the application (the goods) are:
Case no. 656
Investigation Type – Dumping and Subsidy Investigation
Goods: Clear Laminate Glass
The goods the subject of the application (the goods) are:
Clear Laminate Glass (CLG) in actual thickness of between 5 and 13 millimetres (mm). All CLG within this thickness range is included.
The goods the subject of the application have the following characteristics:
The goods the subject of the application (the goods) are:
Ceiling steel framing members, metallic coated, whether or not containing alloys, with a height of up to and including 45 millimetres, a width (face) up to and including 60mm, of a base metal thickness of up to and including 0.65 millimetres of varying steel grades.
Further information
The goods the subject of the application (the goods) are:
Steel corner/finishing beading and angles, metallic coated, whether or not containing alloys, whether or not drilled, punched, perforated or expanded, of all angle types, of a base metal thickness up to and including 40 millimetres, of varying steel grades, with various leg profiles, at various widths and lengths.
Further information
The goods the subject of the application (the goods) are:
Silicon metal containing:
of all forms (i.e. lumps, granules, or powder) and sizes.
Further information on the goods, including exclusions, can be found in ADN 2024/042.
