The goods the subject of the application (the goods) are:
Deep drawn stainless steel sinks with a single deep drawn bowl having a volume of between 7 and 70 litres (inclusive), or multiple drawn bowls having a combined volume of between 12 and 70 litres (inclusive), with or without integrated drain boards, whether finished or unfinished, regardless of type of finish, gauge, or grade of stainless steel and whether or not including accessories;
The goods the subject of the application (the goods) are:
“Interchangeable bolted clipping system clip-heads, with galvanized or powder coating finish, in the size range 12 to 150 mm (i.e. 0.5 inch to 6 inch) diameter, with elongated emboss and square hole for interlocking coach bolt and nut.”
Supporting physical appearance information
The goods the subject of the application (the goods) are:
Interchangeable bolted clipping system brackets, whether or not galvanized, whether or not including nut and bolt, including the following brackets:
The goods the subject of the application (the goods) are:
Clear Laminate Glass (CLG) in nominal thicknesses of 6 to 12 millimetres (mm).
The following table details the tolerances for each of the thicknesses in the nominated range:
The goods the subject of the application (the goods) are:
Hot-rolled rods in coils of steel, whether or not containing alloys, that have maximum cross sections that are less than 14mm. The goods covered include all steel rods meeting the above description regardless of the particular grade or alloy content.
Goods excluded from the measures are:
Hot-rolled deformed steel reinforcing bar in coil form, commonly identified as rebar or debar, and stainless steel in coils.
The goods the subject of the application (the goods) are:
Certain aluminium zinc coated steel that is:
Sizes
in widths equal to or greater than 600mm.
Further information on the goods, including exclusions, can be found in ADN 2024/012 below.
