The goods the subject of the application (the goods) are:

Clear float glass (CFG) in nominal thicknesses of 3 to 12 millimetres (mm).

The tolerances for each of these thicknesses are set out in the following table.

The goods the subject of the application (the goods) are:

Ferrous grinding balls, whether or not containing alloys, cast or forged, with diameters in the range 22 mm to 170 mm (inclusive).

The goods covered include all ferrous grinding balls, typically used for the comminution of metalliferous ores, meeting the above description of the goods, regardless of the particular grade or alloy content.

The goods the subject of the application (the goods) are:

Hot-rolled rods in coils of steel, whether or not containing alloys, that have maximum cross sections that are less than 14mm.

The goods covered include all steel rods meeting the above description regardless of the particular grade or alloy content.

Goods excluded from the measures are:

Hot-rolled deformed steel reinforcing bar in coil form, commonly identified as rebar or debar, and stainless steel in coils.

The goods the subject of the application (the goods) are:

Hot-rolled rods in coils of steel, whether or not containing alloys, that have maximum cross sections that are less than 14mm.

The goods covered include all steel rods meeting the above description regardless of the particular grade or alloy content.

Goods excluded from the measures are:

Hot-rolled deformed steel reinforcing bar in coil form, commonly identified as rebar or debar, and stainless steel in coils.

The goods the subject of the application (the goods) are:

Hot-rolled deformed steel reinforcing bar whether or not in coil form, commonly identified as rebar or debar, in various diameters up to and including 50 millimetres, containing indentations, ribs, grooves or other deformations produced during the rolling process. The goods include all steel reinforcing bar meeting the above description of the goods regardless of the particular grade or alloy content or coating.

The goods subject to the anti-dumping measures do not include:

The goods the subject of the application (the goods) are:

Round seamless copper tube complying with Australian Standard AS 1432, Australian and New Zealand Standard AS/NZ 1571, or Australian Standard AS 1572 with an outside nominal diameter between 9.52 mm and 53.98 mm, and a nominal wall thickness between 0.71 mm and 1.83 mm, including coated tube.

 Further information on the goods, including exclusions, can be found in ADN 2020/071 below.

The goods the subject of the application (the goods) are:

Hot-rolled deformed steel reinforcing bar whether or not in coil form, commonly identified as rebar or debar, in various diameters up to and including 50 millimetres, containing indentations, ribs, grooves or other deformations produced during the rolling process. The goods include all steel reinforcing bar meeting the above description of the goods regardless of the particular grade or alloy content or coating.

The goods subject to the anti-dumping measures do not include:

The goods the subject of the application (the goods) are:

Flat rolled iron and steel products (whether or not containing alloys), of a width less than 600 millimeters (“mm”), plated or coated with aluminium-zinc alloys, not painted, and whether or not including resin coating.

Further information on the goods can be found in the initiation ADN below.

The goods the subject of the application (the goods) are:

Painted steel strapping, of carbon steel, whether or not in coils, whether or not waxed, with a nominal width of 12 mm to 32 mm, a nominal thickness of 0.5 mm to 1.5mm. 

Stainless steel strapping and galvanised steel strapping are excluded from the goods.

Further information on the goods can be found in the initiation ADN below.