Goods Covered by the Application

Hot rolled structural steel sections in the following shapes and sizes, whether or not containing alloys:

• universal beams (I sections), of a height greater than 130mm and less than 650mm;

• universal columns and universal bearing piles (H sections), of a height greater than 130mm and less than 650mm;

• channels (U sections and C sections) of a height greater than 130mm and less than 400mm; and

Goods Covered by the Investigation

The goods subject of the application (the goods) are flat rolled products of:

Iron;

Non-alloy steel; or

Non-heat treated alloy steel of a kind commonly referred to as Quench and Tempered (Q&T) Green Feed;

of a width greater than 600mm, with a thickness equal to or greater than 4.75mm, not further worked than hot rolled, not in coils, with or without patterns in relief.

The following goods excluded from the investigation:

Goods Covered by the Application

Hot rolled coil (including in sheet form), a flat rolled product of iron or non-alloy steel, not clad, plated or coated (other than oil coated).Goods excluded from this application are hot rolled products that have patterns in relief (known as checker plate) and plate products.

Goods Covered by the Application

Hot rolled coil (including in sheet form), a flat rolled product of iron or non-alloy steel, not clad, plated or coated (other than oil coated).Goods excluded from this application are hot rolled products that have patterns in relief (known as checker plate) and plate products.

Goods covered by the application

Hot rolled coil (including in sheet form), a flat rolled product of iron or non-alloy steel, not clad, plated or coated (other than oil coated).

Goods excluded from this application are hot rolled products that have patterns in relief (known as checker plate) and plate products.

Goods Covered by the Investigation

Certain electric resistance welded pipe and tube made of carbon steel, comprising circular and non-circular hollow sections in galvanised and non-galvanised finishes. The goods are normally referred to as either CHS (circular hollow sections) or RHS (rectangular or square hollow sections). The goods are collectively referred to as HSS (hollow structural sections). Finish types for the goods include inline galvanised (ILG), pre-galvanised, hot-dipped galvanised (HDG) and non-galvanised HSS.

Goods Covered by the Investigation

Certain electric resistance welded pipe and tube made of carbon steel, comprising circular and non-circular hollow sections in galvanised and non-galvanised finishes. The goods are normally referred to as either CHS (circular hollow sections) or RHS (rectangular or square hollow sections). The goods are collectively referred to as HSS (hollow structural sections). Finish types for the goods include inline galvanised (ILG), pre-galvanised, hot-dipped galvanised (HDG) and non-galvanised HSS.

Goods covered by the application

Certain electric resistance welded pipe and tube made of carbon steel, comprising circular and non-circular hollow sections in galvanised and non-galvanised finishes. The goods are normally referred to as either CHS (circular hollow sections) or RHS (rectangular or square hollow sections). The goods are collectively referred to as HSS (hollow structural sections). Finish types for the goods include inline galvanised (ILG), pre-galvanised, hot-dipped galvanised (HDG) and non-galvanised HSS.

Goods covered by the applications

Two separate applications were received for zinc coated (galvanised) steel and aluminium zinc coated steel. Due to the close nature of these products and common interested parties, case information is presented on one page.

Note: Galvanised steel and aluminium zinc coated steel exported from China are also currently subject to countervailing investigations. Please see EPR 193 for case information and the public record.

The goods the subject of the application (the goods) are:

Hot-rolled deformed steel reinforcing bar whether or not in coil form, commonly identified as rebar or debar, in various diameters up to and including 50 millimetres, containing indentations, ribs, grooves or other deformations produced during the rolling process.

The goods covered by this application include all steel reinforcing bar meeting the above description of the goods regardless of the particular grade or alloy content or coating.