Case no. 656
Investigation Type – Dumping and Subsidy Investigation
Goods: Clear Laminate Glass
The goods the subject of the application (the goods) are:
Clear Laminate Glass (CLG) in actual thickness of between 5 and 13 millimetres (mm). All CLG within this thickness range is included.
The goods the subject of the application have the following characteristics:
- are often referred to as architectural laminate glass or annealed laminate glass
- contain clear substrate glass (coatings may or may not be present on the surface of the glass)
- are manufactured in flat sheets of any size
- are rectangular or square in shape
- contain two sheets of annealed glass (the two glass sheets being the same or of different thickness)
- contain an interlayer, which can be made up of one or multiple sheets of interlayer of varying thickness, colour and opacity
- can be packaged as lose packs or in end-caps.
Glass with the following characteristics are not the goods the subject of the application:
- laminated glass defined as custom/speciality[1]
- laminated glass that is wired
- laminated glass that is bent, edge-worked, engraved, drilled, enamelled, or otherwise worked
- aminated glass that is framed or fitted with other materials
- laminated glass that is toughened (tempered)
- laminated glass that is acid etched
- laminated glass made of low iron.
Further information on the goods, including exclusions, can be found in ADN 2024/066.
| Case information | |||
|---|---|---|---|
| Applicant | Oceania Glass Pty Ltd | Tariff Classification | 7007.29.00 (statistical codes 18 and 15) |
| Review Period | 1 April 2023 to 31 March 2024 | Injury Examination Period | From 1 April 2020 |
| Contacts for this investigation |
Case Manager: Tel: (02) 6213 6000 |
Mailing address: | The Director - Investigations Anti-Dumping Commission GPO Box 2013 Canberra ACT 2601 |
| Key Dates | |||
|---|---|---|---|
| Initiation Date | 16 September 2024 | Initial submissions due | 23 October 2024 |
| PAD* earliest date | 15 November 2024 | If a PAD is not made, a Day 60 Status Report will be published on this day | |
| Proposals to modify the proposed MCC structure due no later than | 23 October 2024 | ||
| SEF* no later than | 6 January 2025 | SEF submissions due | 20 days after publication of SEF |
| Final recommendation due no later than | 18 February 2025 | Minister's decision expected | Within 30 days of receiving the recommendation |
|
*PAD - Preliminary Affirmative Determination **SEF - Statement of Essential Facts |
|||
| Questionnaires | ||
|---|---|---|
| Exporter | ||
| Importer | Questionnaire | Questionnaire Spreadsheet |
| * Lodgement of Exporter questionnaire is due by: 23 October 2024 | ||
| * Lodgement of Importer questionnaire is due by: Part A: 23 September 2024 Part B, C: 7 October 2024 and Part D & E: 14 October 2024 | ||
[1] These products comprise two sheets of float glass that have been toughened first then bonded with the interlayer. The toughening process takes normal annealed float glass and converts it into safety glass. Such products, which include automotive windows, shower screens and glass table-tops, are stronger than annealed glass. Custom toughened laminate glass is made to the size required by the customer, as toughened glass cannot be further cut. Conversely, Oceania Glass’ annealed CLG can be cut to size by the end customer.
Electronic Public Records
| EPR number | Document type | Title | Date |
|---|---|---|---|
| 12 | Notice - ADN | ||
| 11 | Note for File | ||
| 10 | Submission | ||
| 9 | Submission | ||
| 8 | Note for File | ||
| 7 | Submission | ||
| 6 | Submission | ||
| 5 | Submission | ||
| 4 | Submission | ||
| 3 | Notice - ADN | ||
| 2 | Report | ||
| 1 | Application |