590 - Hollow structural sections from China, Korea, Malaysia, Taiwan

The goods the subject of the application (the goods) are:

Certain electric resistance welded pipe and tube made of carbon steel, comprising circular and non-circular hollow sections in galvanised and non-galvanised finishes. The goods are normally referred to as either CHS (circular hollow sections) or RHS (rectangular or square hollow sections). The goods are collectively referred to as HSS (hollow structural sections). Finish types for the goods include inline galvanised (ILG), pre-galvanised, hot-dipped galvanised (HDG) and non-galvanised HSS. Sizes of the goods are, for circular products, those exceeding 21 millimetres (mm) up to and including 165.1 mm in outside diameter and, for oval, square and rectangular products those with a perimeter up to and including 1277.3 mm.  Categories of HSS excluded from the goods are conveyor tube; precision RHS with a nominal thickness of less than 1.6 mm and air heater tubes to Australian Standard (AS) 2556.

The following goods are excluded from the anti-dumping measures:

• conveyor tube made for high speed idler rolls on conveyor systems, with inner and outer fin protrusions removed by scarfing (not exceeding 0.1mm on outer surface and 0.25mm on inner surface), and out of round standards (i.e. ovality) which do not exceed 0.6mm in order to maintain vibration free rotation and minimum wind noise during operation);
• precision RHS with a nominal thickness of less than 1.6 mm (i.e. not used in structural applications); and
• stainless steel CHS and RHS sections.

Further information on whether goods are included or excluded can be found in the initiation ADN (linked below).