We verify reference standards and calibrate and certify instruments used for trade measurement, quality assurance and legal purposes.
This includes:
- mass standards (e.g. test weights for verifying the accuracy of weighing instruments)
- length measures (e.g. rigid rules and calipers used by government agencies to ensure compliance with legislative requirements, polarimeter tubes used as part of the process for determining sugar content)
- volume measures (e.g. carbon fibre/steel measures for verifying the accuracy of fuel dispensers and glassware used in laboratories).
The calibration of reference standards and measuring instruments provides confidence in the measurements undertaken.
Laboratory locations
We offer calibration services in National Association of Testing Authorities’ accredited laboratories at the following locations.
Brisbane
Our Brisbane laboratory offers calibration services within these ranges:
- mass:
- laboratory mass standards with a calibration range from 1 mg to 1000 kg
- industrial mass standards with a calibration range from 100 g to 5000 kg
- length:
- rigid line measures (rigid graduated rules) with a calibration range from 1 mm to 3000 mm
- precision graticules with a calibration range from 0.1 mm to 20 mm
- volume:
- volumetric glassware with a calibration range from 1 mL to 2000 mL
- industrial volumetric proving measures with a calibration range from 1 mL to 5000 L
- standard measures with a calibration range from 2 L to 1000 L.
Adelaide
Our Adelaide laboratory offers calibration services within these ranges:
- mass:
- laboratory mass standards with a calibration range from 1 mg to 1000 kg
- industrial mass standards with a calibration range from 100 g to 1000 kg
- volume:
- volumetric glassware with a calibration range from 1 mL to 2000 mL
- industrial volumetric proving measures with a calibration range from 100 mL to 1200 L
- standard measures with a calibration range from 2 L to 1000 L.
Perth
Our Perth laboratory offers calibration services within these ranges:
- mass:
- laboratory mass standards with a calibration range from 1 mg to 1000 kg
- industrial mass standards with a calibration range from 100 g to 2000 kg
- length: rigid line measures (rigid graduated rules) with a calibration range from 1 mm to 2000 mm
- volume:
- volumetric glassware with a calibration range from 1 mL to 2000 mL
- industrial volumetric proving measures with a calibration range from 10 L to 1200 L
- standard measures with a calibration range from 2 L to 1200 L.
Request a testing service
To request our services:
- Read our Measurement Standards Unit calibration terms and conditions
- Call us on 1300 686 664 to schedule your calibration
- Email quotes.tmlab@measurement.gov.au with your details and the details of the instrument owner (if different):
- company name
- ABN/ACN
- postal address
- physical address
- contact name
- phone
- Include the instrument details:
- description
- range (e.g. 15 L, 1 m, 5 kg to 100 mg)
- serial number
- number of items
- special conditions, e.g. temp points
- contact name for report or certificate
- service required
- whether you need a report and/or certificate.
A testing officer will assess your requirements and contact you to determine a suitable time.
Certificate types
We can issue certificates to use for different purposes. In your request, indicate if you need:
- regulation 13 and 34C certificates to provide evidence of legal traceability to national standards, including using it as evidence in court
- a regulation 13 certificate if you use measurement standard for calibrating instruments used for trade or legal purposes
- a regulation 34C certificate if you use the artefact or instrument to determine a measurement for a legal purpose.